LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3787 (Audio, Navigation, Anti-Theft, Airbag Control - Repair - F12) >> Anti-Theft Alarm System >> 65 75 090 Removing and installing/replacing interior movement detection module in left or right B-pillar

65 75 090 Removing and installing/replacing interior movement detection module in left or right B-pillar

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary work: 

Release screw (1).

Remove microwave sensor (2) from holder (3) on side trim panel in direction of arrow.

Fig 1: Removing Microwave Sensor From Holder On Side Trim Panel
G10048946Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/CODING