51 76 030 Removing and installing/replacing rear engine hood/bonnet seal

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Up to 08/2008:

Open and detach left and right service flaps (1).

From 09/2008:

Remove service flaps (1). See 51 71... Removing and installing or replacing service flap of left or right cover (from 09/2008) .

Feed out seal (2) and lay to one side.

NOTE: If necessary, detach front engine compartment lid seal (3) in operating range.

Fig 1: Detaching Front Engine Compartment Lid Seal

Courtesy of BMW OF NORTH AMERICA, INC.