51 21 300 Removing and installing or replacing window cavity cover strip on outside of left or right front door
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Observe procedure for using special tool 00 9 324
. See 51 21... REMOVING WEATHER STRIP WITH SPECIAL TOOL 00 9 324 AT FRONT OR REAR .
Attach fabric adhesive tape (2) beneath window cavity cover strip (1).
IMPORTANT:
If reusing the existing window cavity cover strip (1), make sure it is not bent.
Lever out window cavity cover strip (1) with special tool 00 9 324 (startng at B-pillar).
Installation:
In area (A) of cavity strip (1), cover door panel (2) with adhesive tape (risk of damage).
Insert cavity strip (1) in guide (3) and press on.