51 47 000 Removing and installing/replacing front (inside) left or right entrance cover strip
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Risk of damage!
Risk of breakage to connecting lug on B-pillar trim panel.
Risk of breakage to connecting lug on B-pillar trim panel.
IMPORTANT:
Risk of damage!
Do not raise door sill cover strip (1) over entire length simultaneously.
Do not raise door sill cover strip (1) over entire length simultaneously.
Detach entrance cover strip (1) at clips (2) from front to rear.
Detach entrance cover strip (1) from B-pillar trim panel at bottom in direction of arrow.
If necessary, lever out clips (2) from floor pan.
Installation note:
Fit door sill cover strip (2) with preinstalled clips (1).
If necessary, replace faulty clips (1).
Connecting lug (3) of entrance cover strip (2) must not be damaged.