66 53 060 Removing and installing/renewing the Top View camera

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove protective cap on exterior mirror. See 51 16 041 REMOVING AND INSTALLING/REPLACING COVER CAP ON LEFT OR RIGHT EXTERIOR MIRROR .

Unfasten plug connection (1) and disconnect.

Unfasten screws (2).

Remove exterior mirror camera.

Fig 1: Identifying Exterior Mirror Camera Plug Connection With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Use of a special tool is no longer required.

Calibration:

Calibration is performed via BMW diagnosis system:
- Service function
- Body
- All-round vision camera
- Calibration of all-round vision camera