36 10 713 Check one road wheel on balancing machine for lateral and radial runout (wheel removed)

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

36 1 030
36 1 031
36 1 032
36 1 033
36 1 034
36 1 035
36 1 036

Necessary preliminary tasks:

Remove WHEEL

Mount wheel in balancing machine.

To avoid clamping errors, fit the wheel on the balancing machine in the same way as it is also fitted on the vehicle (valve position facing down).

Fig 1: Identifying Wheel On Balancing Machine

Courtesy of BMW OF NORTH AMERICA, INC.

Use suitable wheel centering element supplied with corresponding balancing machine.

Basic flange
Wheel centering element
Type flange
Nut

Fig 2: Identifying Wheel Centering Element, Flange And Clamping Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 36 1 030 for checking.

Special tool 36 1 030 consists of:

Base 36 1 031
Post with clamp 36 1 032
Holder with clamp 36 1 033
Clamp 36 1 034
Measuring roll 36 1 035
Dial gauge 36 1 036

Fig 3: Identifying Special Tools 36 1 030
Courtesy of BMW OF NORTH AMERICA, INC.

Position special tool 36 1 030 on tire tread surface.

Spin wheel by hand and measure maximum radial tire runout . See WHEELS TWO-PART ALLOY WHEELS , WHEELS ONE-PART ALLOY WHEELS or WHEELS STEEL AND ALUMINUM STRIP WHEELS .

NOTE: Measuring device must be vertical to tire tread surface.

Fig 4: Positioning Special Tool 36 1 030 On Tire Tread

Courtesy of BMW OF NORTH AMERICA, INC.

Position special tool 36 1 030 on tire sidewall.

Spin wheel by hand and measure maximum radial tire runout . See WHEELS TWO-PART ALLOY WHEELS , WHEELS ONE-PART ALLOY WHEELS , or WHEELS STEEL AND ALUMINUM STRIP WHEELS

NOTE: Measuring device must be vertical to tire side wall.
Never measure on tire inscription!
If necessary, check DISC WHEEL (wheel rim) for radial and face runout.

Fig 5: Positioning Special Tool 36 1 030 On Tire Side Wall

Courtesy of BMW OF NORTH AMERICA, INC.