61 31 172 Removing and installing/replacing switch for electromechanical parking brake
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- DISCONNECT NEGATIVE BATTERY CABLE (to avoid fault memory entries)
- F03 only: Disconnect both battery negative cables
- Remove GEAR SELECTOR SWITCH COVER
Release screws (1).
Remove switch for electromechanical parking brake (2) from cover for gear selector switch (3).