61 34... Removing and installing/replacing 12-V socket in the front storage compartment

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 0 250

Necessary preliminary tasks:

Remove cup holder insert. See 51 16 202 REMOVING AND INSTALLING/REPLACING FRONT CUPHOLDER .

Pull the 12-V socket with special tool 61 0 250 from the storage compartment housing until the connector is below on the light ring.

Fig 1: Pulling 12-V Socket Using Special Tool 61 0 250

Courtesy of BMW OF NORTH AMERICA, INC.