32 33 010 Removing and installing/replacing sport steering wheel (without paddle shift)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Chassis/wheel alignment is not necessary after the steering wheel has been removed and installed or replaced.
Necessary preliminary work:
- Remove AIRBAG UNIT
Move wheels/sport steering wheel into straight-ahead position.
Disconnect plug connection (1).
Release screw (2) and remove sport steering wheel.
Installation note:
Make sure connecting line(s) is/are correctly laid.
Tightening torque 32 33 1AZ .
Installation note:
Version with steering wheel heating: Before fitting sport steering wheel on steering column, ensure correct cable routing.
Align sport steering wheel by way of marking (1) to steering column marking (2) and attach.
Replacement:
- Modify both SWITCHES ON SPORT STEERING WHEEL
- Modify DESIGN COVER
- If necessary, modify STEERING WHEEL MODULE CONTROL UNIT