32 33 000 Removing and installing/replacing steering wheel
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Chassis/wheel alignment is not necessary after the steering wheel has been removed and installed or replaced.
Necessary preliminary tasks:
- Remove AIRBAG UNIT
Move wheels/steering wheel into straight-ahead driving position.
Disconnect plug connection (1).
Release screw (2) and remove steering wheel.
Installation note:
Make sure connecting line(s) is/are correctly laid.
Tightening torque 32 33 1AZ .
Installation note:
Before fitting steering wheel on steering column, ensure correct cable routing.
Align steering wheel by way of marking (1) to steering column marking (2) and attach.
Replacement:
- Modify DESIGN COVER
- Modify MULTIFUNCTION STEERING WHEEL SWITCH
- If necessary, modify STEERING WHEEL MODULE CONTROL UNIT