22 32 055 Removing and installing/replacing transmission bearing block (N55, N57) all-wheel drive vehicle
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 51 3 310
Necessary preliminary tasks:
- Remove TRANSMISSION SUPPORT BRACKET
- Release transmission cross-member . See 22 32 050 REPLACING CROSS-MEMBER FOR TRANSMISSION MOUNTING (N57) AWD or 22 32 050 REPLACING THE CROSS MEMBER FOR THE TRANSMISSION MOUNTING (N20, N55, N47) ALL-WHEEL DRIVE VEHICLE from body.
- Slightly lower the transmission.
Release screws (1) with special tool 51 3 310.
Tightening torque 22 32 7AZ .
Remove transmission mounting bracket (2) on left transmission side.