84 50 060 Removing and installing or replacing Bluetooth aerial

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove GEAR SELECTOR SWITCH CARRIER

Disconnect plug connection (1).

Unfasten screws (2).

Remove Bluetooth aerial (3) from air duct (4).

Fig 1: Identifying Bluetooth Aerial, Air Duct, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.