65 50... Removing and installing/replacing IR board for rear cabin monitor

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim for rear cabin AT FRONT AND REAR BASE

Release electric cable (1) from guides.

Installation:

Ensure correct cable routing.

Fig 1: Identifying Electric Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove IR board and disconnect associated plug connection.

Fig 2: Identifying IR Board Screws

Courtesy of BMW OF NORTH AMERICA, INC.