65 24 030 Removing and installing/replacing TV amplifier

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR BUMPER TRIM

Feed aerial/antenna (1) out of guides (3) and through opening (2).

Installation:

Make sure aerial/antenna is laid correctly.

Fig 1: Identifying Aerial/Antenna, Guides And Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screw (2) and remove TV amplifier (3).

Fig 2: Identifying Plug Connection, TV Amplifier And Screws

Courtesy of BMW OF NORTH AMERICA, INC.