65 12... Removing and installing/replacing aerial/antenna splitter (IBOC) (US version only)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove DIGITAL RADIO

Release screws (1).

Disconnect plug connections (2) and remove aerial/antenna splitter (3).

Fig 1: Identifying Plug Connections, Aerial/Antenna Splitter And Screw

Courtesy of BMW OF NORTH AMERICA, INC.