63 99 312 Replacing bulb(s) for left or right rear light (on rear lid/USA)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Necessary preliminary tasks:

Remove SOCKET HOUSING FOR REAR LIGHT

Press bulb (1) in direction of socket housing for tail light/brake force display (2), turn in direction of arrow and remove from socket housing for tail light/adaptive brake light force display (2).

Installation:

Note BULB TYPE .

Fig 1: Identifying Bulb And Socket Housing For Tail Light/Brake Force Display

Courtesy of BMW OF NORTH AMERICA, INC.