63 26 000 Removing and installing/replacing left or right number/license plate light
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Lever out licence plate light (1) with special tool 64 1 020 in direction of arrow (A) from tailgate (2).
Remove number/license plate light (1) in direction of arrow (B).
Disconnect plug connection underneath.
Replacement:
If necessary, remove BULB .
Note BULB TYPE .