17 11 000 Removing and installing radiator (N63 hybrid)
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
High-voltage system - danger to life!
WARNING:
The following points must be strictly observed prior to starting work:
- DE-ENERGIZE THE HIGH-VOLTAGE SYSTEM
- Observe SAFETY INSTRUCTIONS for handling with hybrid vehicles
WARNING:
Danger of scalding!
Only perform this work after engine has cooled down.
Only perform this work after engine has cooled down.
IMPORTANT:
Wear safety goggles and protective gloves.
Necessary preliminary tasks:
- Remove UNDERBODY PROTECTION
- Follow INSTRUCTIONS FOR WORKING on cooling system
- Remove FAN COWL
- Drain COOLANT
- Unlock coolant hoses and detach.
- Release radiator AIR DUCT , do not remove air duct.
Release screws.
Remove cover (1).
Remove radiator (1) towards top.