13 51 Injection pump, control
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ High-pressure pump to cylinder head cover | N63 / N63 Hybrid / S63 | M6 | Replace screws. Tighten bolts to final torque/angle in uniform increments of 90°. Follow repair instruction See 13 51 065 REMOVING AND INSTALLING/REPLACING LEFT HIGH PRESSURE PUMP (N63 HYBRID) or 13 51 070 REMOVING AND INSTALLING/REPLACING RIGHT HIGH PRESSURE PUMP (N63 HYBRID) ! |
12 Nm |