65 50 160 Removing and installing/replacing cover for rear passenger compartment monitor at front
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with NOTES
on protection against electrostatic damage (ESD protection).
Necessary preliminary tasks:
IMPORTANT:
Do not damage or scratch display.
Release screws (1).
Tightening torque: see 1AZ in 65 50 REAR-COMPARTMENT MONITOR .
Carefully disconnect plug connection (3).
Remove rear passenger compartment monitor (4) from cover (5).
Installation note:
Ensure correct cable routing in guides (2).
Make sure cover (5) is correctly seated on rear passenger compartment monitor (4).