65 50 165 Removing and installing/replacing trim for rear monitor display at rear
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with NOTES
on protection against electrostatic damage (ESD protection).
Necessary preliminary tasks:
Release screws (1).
Tightening torque: see 1AZ in 65 50 REAR-COMPARTMENT MONITOR .
Remove cover (3) from rear monitor (4), unclipping plug (2) and feed out cable.
Installation note:
Make sure cover (3) is correctly seated on rear monitor (4).