16 12 060 Removing and installing/replacing carbon canister (US version NVLD)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear right WHEEL ARCH PANEL
Unlock snap fasteners (1) and remove tank ventilation lines.
Disconnect plug connection (2).
Release screws (3) and swing out carbon canister.
Installation note:
Tightening torque: see 1AZ in 16 13 TANK VENTILATION
The following components must be modified when the carbon canister is replaced: