Fitting spacer buffers
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
To avoid rear window breakage and wind noises:
Completely remove remnants of removed spacer buffers and maintain installation location exactly.
The following spacer buffer is fitted.
6 x spacer buffers (5x5x20)
Installation position of spacer buffers (1) is specified on body side with markings (2).
Installation note:
If necessary, replace faulty UPPER REAR WINDOW COVER .
If necessary, replace faulty LOWER RUBBER FRAME for rear window.