64 11 545 Removing and installing blower housing for heating and air-conditioning unit

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove RIGHT/REAR SUSPENSION CROSS-BRACE
Remove AUXILIARY ELECTRONICS BOX

Unlock plug connection (1) on AUC sensor (2) and disconnect.

Fig 1: Identifying Lock Plug Connection On AUC Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on blower housing cover (2).

Lift out blower housing cover.

Fig 2: Identifying Fan Housing Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on fan housing (2).

Unlock plug connections (3) and disconnect.

Carefully feed out fan housing (2).

Fig 3: Identifying Fan Housing Screws And Fasten Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.