61 13 050 Removing and installing/replacing power distribution box in passenger compartment

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe SAFETY INFORMATIONS for handling vehicle battery.

Necessary preliminary tasks:

Clamp off BATTERY LEAD FROM NEGATIVE CONNECTION POINT
Detach both battery cables for negative terminal in F03
Remove RIGHT GLOVE BOX WITH HOUSING

Disconnect plug connection (1) from power distribution box in passenger compartment (3) and junction box electronics.

Release screw (2).

Tightening torque 61 14 1AZ.

Feed out power distribution box in passenger compartment (3) from retaining clips (4) in direction of arrow.

UNLOCK AND DISCONNECT PLUG CONNECTIONS behind.

Fig 1: Feeding Out Power Distribution Box In Passenger Compartment From Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify JUNCTION BOX ELECTRONICS
Modify fuses