72 11 101 Removing and installing/replacing rear center seat belt

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR SEAT .
Remove rear window shelf. See REMOVING TRIM PANEL FOR STORAGE SHELF or REMOVING TRIM PANEL FOR STORAGE SHELF (WITH ROLLER SUNBLIND) .

Release screw (1).

Tightening torque 72 11 21AZ .

Installation note:

End fitting is coded against incorrect assembly.

Fig 1: Identifying Rear Seat Belt Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (1).

Tightening torque 72 11 20AZ .

Remove automatic reel with anchor fitting.

Installation note:

Automatic reel is coded against incorrect installation.

Fig 2: Identifying Automatic Reel Anchor Fitting Nut

Courtesy of BMW OF NORTH AMERICA, INC.