72 11 092 Removing and installing or replacing rear left or right seat belts

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove rear window shelf. See REMOVING TRIM PANEL FOR STORAGE SHELF or REMOVING TRIM PANEL FOR STORAGE SHELF (WITH ROLLER SUNBLIND) .
Remove REAR SEAT .

Removing left or right automatic reel:

Release screw (1).

Tightening torque 72 11 21AZ .

Installation note:

End fitting is coded against incorrect assembly.

Fig 1: Identifying Automatic Reel Mounting Screw

G06885827

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 72 11 20AZ .

Remove automatic reel (2) with end fitting.

Fig 2: Identifying Automatic Reel With End Fitting And Screw

G04728060

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Pay attention to encoding.

Push inertia reel unit (1) onto body tab (2).

Fig 3: Pushing Inertia Reel Unit Onto Body Tab

G04728061

Courtesy of BMW OF NORTH AMERICA, INC.