41 62 051 Removing and installing/replacing left or right hinge for tailgate (without hinge mounting bracket)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- REMOVE BOTH GAS PRESSURE SPRINGS for the tailgate.
- Remove REAR WINDOW
- Remove COVER FOR REAR WINDOW FRAME AT TOP
Release screw (1).
Tightening torque 41 62 1AZ .
Unfasten screws (2).
Tightening torque 41 62 10AZ.
Remove hinge.
Installation note:
Repair paintwork damage on the screws.
Adjust rear lid on the basis of the GAP DIMENSIONS, BODY