51 24 300 Removing and installing or replacing left or right gas strut for rear lid
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Support rear lid in fully opened position with suitable apparatus. Risk of injury.
Make a written record of the installation position of the gas pressure support(s) before removing.
Slide stop spring (1) to end of gas pressure spring (2) and lever out gas pressure spring. Repeat the procedure at the other end of the gas strut (2) and remove.