LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2923 (Engine And Transmission Mounting - Repair - E91) >> 2232 Transmission Mounting, Automatic Transmission >> 22 32 001 Replacing rubber mount for transmission mounting (RWD automatic) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Unfasten screws (1) and nuts (2).

Remove transmission crossmember.

Remove rubber mount from transmission cross-member.

Tightening torque 24 71 1AZ/2AZ .

NOTE: Illustration similar.
Fig 1: Identifying Transmission Cross-Member Mounting Screws And Nuts
G04725982Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals