51 75 001 Removing and installing/replacing left or right underbody cover

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Work shown on E90 by way of example, deviations in detail are possible in other models.

Release clips (1).

Release screws (2).

Remove underbody cover (3).

Installation:

Replaced damaged clips (1).

Fig 1: Identifying Clips And Screws On Underbody Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Make sure underbody cover (3) is correctly seated.