LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2923 (Engine And Transmission Mounting - Repair - E91) >> 2231 Transmission Mounting, Manual Transmission >> 22 31 001 Replacing rubber mount for transmission mounting (RWD, manual) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove screws and nuts.

Remove transmission crossmember (1).

Remove rubber mount from transmission cross-member.

Tightening torque 22 32 3AZ/4AZ .

Fig 1: Identifying Transmission Cross-Member With Mounting Screws And Nuts
G04725981Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals