51 33 000 Removing and installing (replacing) power window regulator in left or right front door: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Disengage, but do not remove, door window and secure in the door window frame.

Necessary preliminary work:

FRONT DOOR WINDOW

Unscrew nuts (1).

Feed out rear section of power window unit (2) in direction of arrow.

Tightening torque 51 33 1AZ .

Fig 1: Removing Power Window Unit Rear Section

Courtesy of BMW OF NORTH AMERICA, INC.

Feed out front section of power window unit (1) with flat motor (2) in direction of arrow from front door.