Necessary preliminary tasks
WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
- Remove UNDERBODY COVER
Release screws (1).
Installation:
Replace screws.
Tightening torque 33 33 2AZ .
Release screw (3) and remove compression strut (2).
Installation:
Check threads for damage; if necessary, repair with HELICOIL THREAD INSERTS .
Tightening torque 33 33 1AZ .