84 50 060 Removing and installing or replacing Bluetooth aerial

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove PEDAL ASSEMBLY TRIM

Version A:

Disconnect plug connection (1) and unclip aerial (3) from mountings (2).

Fig 1: Identifying Plug Connection And Aerial On Mountings

Courtesy of BMW OF NORTH AMERICA, INC.

Version B:

Disconnect associated plug connection.

Release retaining clips (1).

Installation:

Do not damage pedal assembly panelling in working area.

Replace damaged retaining clips.

Remove Bluetooth aerial (2).

Fig 2: Identifying Retaining Clips And Bluetooth Aerial

Courtesy of BMW OF NORTH AMERICA, INC.