65 11 070 Removing and installing/replacing CD changer

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE LEAD
Remove LUGGAGE COMPARTMENT trim on left.
If necessary, remove video module for on-board monitor

NOTE: Follow instructions for HANDLING OPTICAL FIBRES .

Release screws (1).

Pull CD changer (2) forward and unlock and disconnect plug connections.

Remove CD changer (2) complete with holder.

Fig 1: Identifying CD Changer With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and remove holder (3) from CD changer (2).

Fig 2: Identifying Screws, Holder And CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.