66 31 100 Removing and installing/replacing longitudinal dynamics module

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks

Remove CONTROL UNIT FOR CAR ACCESS SYSTEM

Release bolts (1) and disconnect associated plug connection.

Remove longitudinal dynamics module (2).

Fig 1: Identifying Longitudinal Dynamics Module Bolts

Courtesy of BMW OF NORTH AMERICA, INC.