13 62 531 Replacing coolant temperature sensor (S65)
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Read out fault memory of DME control unit; if necessary, work through test schedules
- Switch off ignition
- REMOVE INTAKE AIR MANIFOLD
Unlock plug and remove
Remove temperature sensor.
Installation:
Tightening torque, 13 62 1AZ
NOTE:
Now clear the fault memory.