64 11 908 Removing and installing/replacing footwell temperature sensor

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM PANEL FOR PEDAL ASSEMBLY .

NOTE: For purposes of clarity, the following graphic shows the heater/air conditioner removed.

Remove air routing duct (1) and unscrew temperature sensor (2).

Fig 1: Identifying Air Routing Duct And Temperature Sensor

Courtesy of BMW OF NORTH AMERICA, INC.