11 00 091 Installing replacement engine (S65)

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: No running-in engine oil required.
10W-60

Necessary preliminary tasks:

Remove and install ENGINE .
Flush cooling system.

Installation:

If necessary, replace following components.

Clutch
Drive belt.
All outer seals.

Replace all anti-fatigue bolts on flywheel and vibration damper.

Change coolant.
Fill engine with engine oil.