11 31 094 Removing and installing/replacing left hydraulic chain tensioner (S65)
WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove left INTAKE FILTER HOUSING
- Remove INTAKE AIR MANIFOLD .
Release chain tensioner (1).
Installation:
Replace sealing ring.
Tightening torque: 11 31 1AZ .
Assemble engine.