LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2715 (Distance Systems, Cruise Control - Repair - E90) >> 6620 Park Distance Control >> 6620560 Removing and installing/replacing rear signal sensor (Park Distance Control) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screw (1).

Remove holder (2) from C-pillar (3) and feed out of rear window shelf.

Fig 1: Identifying Screw, Holder And C-Pillar
G04728010Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Holder (1) must snap into guide hole (2) in C-pillar.

Fig 2: Identifying Holder And Guide Hole
G04728011Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove signal sensor (2).

scientia non olet · About LEMON Manuals