Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

If necessary, remove reinforcement carrier.
Remove rear UNDERBODY PROTECTION .
If necessary, release middle heat shield, do not remove.

NOTE: Only if heat shield has to be released.

Release nut (1) and remove bracket from rear differential.

Slide heat shield towards rear.

Fig 1: Identifying Bracket Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Lever support bearing (1) with a short screwdriver out of mounting.

Pull support off shift arm.

Fig 2: Removing Support Bearing

Courtesy of BMW OF NORTH AMERICA, INC.