2511000 Removing and installing shift lever: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335xi, and 2010 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove reinforcement carrier.
Remove rear UNDERBODY PROTECTION .
Remove heat shields.
Remove KNOB for shift lever.
Remove gaiter for shift lever cover.

If necessary

Support transmission with workshop jack.

Remove screws and nuts.

Remove cross-member.

Tightening torque 23 71 1AZ/2AZ .

Fig 1: Identifying Transmission Cross-Member With Mounting Screws And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Remove SHIFT ROD (2).