LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2594 (Engine Electrical System - Repair - E90 (N52)) >> 1241 Starter With Mounting >> 12 41 020 Removing and installing/replacing starter (N52, N52K, N51, N53, N54) >> Replace aluminium screws

Replace aluminium screws

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Tightening torque 12 41 1AZ .

Unfasten screws (2).

Installation: 



Tightening torque 12 41 2AZ .

Remove starter motor (3).

Fig 1: Identifying Starter Motor And Screws
G04751336Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Check starter pinion and ring gear for damage. Replace starter if necessary.

scientia non olet · About LEMON Manuals