12 41 Starter motor with mounting
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - STARTER MOTOR WITH MOUNTING
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Starter motor mounting to crankcase | N52/N52K/N51/N53 | M10x85 | Replace screw Jointing torque Torque angle |
20 Nm 180 ° |
| 2AZ Starter motor mounting to crankcase | N52/N52K/N51/N53 | M10x30 | Replace screw Jointing torque Torque angle |
20 Nm 90 ° |
| 3AZ Battery positive lead to starter | N52/N52K/N51/N53 | M8 | 13 Nm |