Replace aluminium screws

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Flywheel And Existing Transmission Bolt With Special Tool (11 9 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten flywheel screws.

Tightening torque 11 22 1AZ .

Installation:

Flywheel (1) is secured with an alignment pin.

Fit new flywheel screws.

Clean all threads for flywheel screws in crankshaft.

Release flywheel bolts with special tool 11 4 180 .

Tightening torque 11 22 2AZ .

Installation:

Flywheel is secured with a dowel pin.

Fit new flywheel screws.

Clean all threads for flywheel screws in crankshaft.

Fig 1: Identifying Existing Transmission Bolt With Special Tools (11 9 255, 11 9 260 And 11 4 180)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.