11 22 Flywheel
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FLYWHEEL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screws Flywheel to crankshaft for automatic transmission. |
N52K | M12 x 25.5 | Replace screws. Jointing torque and final tightening must be observed without fail. 1. Jointing torque 2. Final tightening |
30 Nm 125 Nm |
| 2AZ ISA screws Flywheel to crankshaft for manual gearbox. |
N52K | M12 x 25 | Replace screws. | 120 Nm |