LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2592 (Engine - Repair - N52 - E90) >> Crankshaft With Bearing >> 11 22 500 Removing and installing/replacing flywheel (N52K) >> Replace aluminium screws

Replace aluminium screws

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Supporting Flywheel With Existing Transmission Bolt And Special Tool 11 9 260
G04751112Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten flywheel screws.

Tightening torque 11 22 1AZ .

Installation: 

Flywheel (1) is secured with an alignment pin.

Fit new flywheel screws.

Clean all threads for flywheel screws in crankshaft.



Release flywheel bolts with special tool 11 4 180 .

Tightening torque 11 22 2AZ .

scientia non olet · About LEMON Manuals