2620001 Replacing front propeller shaft
WARNING: This page is about a different car, the 2006 BMW 330xi and 2006 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Do not move vehicle with engine power once propeller shaft has been removed.
Replace propeller shaft only in conjunction with a new drive flange and radial shaft seal for front axle output.
Replace propeller shaft only in conjunction with a new drive flange and radial shaft seal for front axle output.
IMPORTANT:
- Replacement only:
according to installation with BMW diagnosis and information system under control unit function
Perform functional check of transfer box (calibration)
- Remove front propeller shaft .
- Replace OUTPUT FLANGE for front axle output.
- Replace RADIAL SHAFT SEAL for output front axle.